您的位置 首页 开关

根据MCP200x规划的LIN双向半双工通讯计划

This device provides a bidirectional, half-duplex communication physical interface to automotive and

This device provides a bidirectional, half-duplex communication physical interface to automotive and industrial LIN systems to meet the LIN bus specification Revision 2.1 and SAE J2602. The device is short circuit and overtemperature protected by internal circuitry.The device has been specifically designed to operate in the automotive operating environment and will survive all specified transient conditions while meeting all of thestringent quiescent current requirements.

MCP200X family members:

8-pin PDIP, DFN and SOIC packages:

MCP2003, LIN-compatible driver, with WAKE pins

MCP2004, LIN-compatible driver, with FAULT/TXE pins

MCP200x 系列首要特性:

The MCP2003 and MCP2004 are compliant with LIN Bus Specifications 1.3, 2.0 and 2.1 and are compliant to SAE J2602

Support Baud Rates up to 20 Kbaudwith LIN-compatible output driver

43V load dump protected

Very low EMI meets stringent OEM requirements

Very high ESD immunity:

– >20kV on VBB (IEC 61000-4-2)

– >14kV on LBUS (IEC 61000-4-2)

Very high immunity to RF disturbances meets stringent OEM requirements

Wide supply voltage, 6.0V-27.0V continuous

Extended Temperature Range: -40 to +125℃

Interface to PIC® MCU EUSART and standard USARTs

Local Interconnect Network (LIN) bus pin:

– Internal pull-up resistor and diode

– Protected against battery shorts

– Protected against loss of ground

– High current drive

Automatic thermal shutdown

Low-power mode:

– Receiver monitoring bus and transmitter off, (5 μA)

MCP200x 使用:

The MCP2003/4 transceivers are appropriate for applications in the automotive market, including rain sensors, sunroofs, window lift and many other sensor or actuator-based systems. The devices are also appropriate for many non-automotive applications, including those in the industrial (e.g. large lawn mowers, golf carts, metering and door locks); medical (e.g. motors and control panels on wheel chairs, and hospital beds); and appliance markets (e.g. washing machine and stove control panels and sensors).


图1.MCP2003方框图

图2.MCP2004方框图

图3.MCP2003典型使用电路

图4.MCP2004典型使用电路

图5.MCP200x使用框图

声明:本文内容来自网络转载或用户投稿,文章版权归原作者和原出处所有。文中观点,不代表本站立场。若有侵权请联系本站删除(kf@86ic.com)https://www.86ic.net/dianyuan/kaiguan/133548.html

为您推荐

联系我们

联系我们

在线咨询: QQ交谈

邮箱: kf@86ic.com

关注微信
微信扫一扫关注我们

微信扫一扫关注我们

返回顶部